KB.15.15

Figure 15 Example of static routes in an ECMP application

VLAN-1

VLAN-2

Routing

Switch

Router

2001:db8:1::2

Router

2001:db8:1::1

Static Routes

ipv6 route 2001:db8:5::/64

2001:db8:1::1

The no ip load-sharing 2 - 4 command enables or disables load-sharing for both IPv4

and IPv6 applications and specifies the number of ECMP routes to allow. In the default configuration,

load-sharing is enabled with four ECMP routes allowed. For more information, see “About equal-cost

multi-path routing” (page 255).

About static routing 185