IPv6 Configuration Guide K/KA/KB.15.15

Example 10 show IPv6 route output
Examples of addresses in ouput:
“Unknown” Address
Dest : ::/0 Type : static
Gateway : fe80::213:c4ff:fedd:14b0%vlan10 Dist. : 40 Metric : 0
Loopback Address
Dest : ::1/128 Type : connected
Gateway : lo0 Dist. : 0 Metric : 1
Global Unicast Address Configured on the Switch
Dest : 2001:db8:a03:e102::/64 Type : connected
Gateway : VLAN10 Dist. : 0 Metric : 1
Link-Local Address Configured on the Switch
Dest : fe80::%vlan10 Type : connected
Gateway : VLAN10 Dist. : 0 Metric : 1
Link-Local Address Assigned to the Loopback Address
Dest : fe80::1%lo0 Type : connected
Gateway : lo0 Dist. : 0 Metric : 1
Viewing IPv6 router information
Syntax:
show ipv6 routers [ vlan vid ]
Lists the switch's IPv6 router table entries for all VLANs configured on the switch or
for a single VLAN. This output provides information about the IPv6 routers from
which RAs have been received on the switch.
NOTE: This command reports on IPv6 routers the switch has learned of through
operation as a host or client of a router. If the switch itself is configured as an IPv6
router (routing switch), the output of this command is empty.
vlan vid
Optional. Specifies only the information on IPv6 routers on the indicated VLAN.
Router Address
The IPv6 address of the router interface.
Preference
The relative priority of prefix assignments received from the router when prefix
assignments are also received on the same switch VLAN interface from other
IPv6 routers.
Interface
The VLAN interface on which the router exists.
MTU
The maximum transmission unit (in bytes) allowed for frames on the path to the
indicated router.
Hop Limit
The maximum number of router hops allowed.
View IPv6 gateway, route, and router neighbors 27