Management Module Installation Instructions

7. Use an equal amount of pressure and push both extractor handles closed to completely seat the
module.
8. Tighten the retaining screws.
Figure 1 shows the Management Module removal for an HP 5400R zl2 switch.
For a copy of the HP Switch zl Modules Installation Guide, access the HP Networking web site at
www.hp.com/networking/support. Auto Search for your switch model number (for example 5412),
select your model from the list, and then click on the following links:
Display selected, and then Product
support information (manuals, FAQs, knowledge base)
.
Battery Statements:
ATTENTION
ll y a danger d'explosion s'il y a remplacement incorrect de la batterie.
Remplacer uniquement avec une batterie du même type ou d'un type équivalent
recommandé par le constructeur.
Mettre au rebut les batteries usagées conformément aux instructions du fabricant.
Figure 1. Removing a HP 5406R zl2 Management Module
1 Retaining Screws
Retaining Screws
2 Ejector Handles
3 Management Module