KB.15.15

Table 15 CLI display of OSPF external link state information

ContentField

LSA ID for this LSA. Normally, the destination of the external route,

but may have some "host" bits set.

Link State ID

Router ID of the router that originated this external LSA.Router ID

Current age (in seconds) of this LSA.Age

Sequence number of the current instance of this LSA.Sequence #

LSA checksum value.Chksum(Hex)

Syntax:

show ip ospf external-link-state [status] [subset-options]

router-id ip-addr Subset option to filter displayed

external-link-state data to show LSAs with the

specified router ID only. Can also be filtered

by using the link-state-id or

sequence-number options.

sequence-number integer Subset option to filter displayed

external-link-state data to show LSAs with the

specified sequence number. Can also be

filtered by using the link-state-id or

router-id options.

link-state-id ip-addr Subset option to filter displayed

external-link-state data to show LSAs with the

specified ID only. Can also be filtered by using

the sequence-number or router-id

options.

Syntax:

show ip ospf external-link-state [status]

advertise

Displays the hexadecimal data in the specified LSA packet, the actual contents of

the LSAs. Can also be filtered by using the link-state-id, router-id, or

sequence-number options.

Example 97 Output for show ip ospf external-link-state advertise

HP Switch# show ip ospf external-link-state advertise

OSPF External LSAs