KB.15.15

Example

Example 100 show ip ospf interface ip-addr output

HP Switch(ospf)# sho ip ospf int 10.10.50.1

OSPF Interface Status for 10.3.1836

IP Address : 10.3.18.36 Status : enabled

Area ID : 10.3.16.0

State : BDR Auth-type : none

Cost : 1 Chain :

Type : BCAST Priority : 1

Transit Delay : 1 Retrans Interval : 5

Hello Interval : 10 Rtr Dead Interval : 40

Designated Router : 10.3.18.34 Events : 3

Backup Desig. Rtr : 10.3.18.36

Example 101 show ip ospf interface ip-addr backbone output

HP-E3500yl-24G(vlan-1)# show ip ospf interface 10.2.1.2

OSPF Interface Status for 10.2.1.2

IP Address : 10.2.1.2 Status : enabled

Area ID : backbone

State : Point-to-point Auth-type : none

Cost : 1 Chain :

Type : Point-to-point Priority : n/a

Transit Delay : 1 Retrans Interval : 5

Hello Interval : 10 Rtr Dead Interval : 40

Designated Router : n/a Events : 0

Backup Desig. Rtr : n/a Passive : no

Neighbors : 1

Example 102 show ip ospf interface ip-addr neighbor output

HP-E3500yl-24G(vlan-1)# show ip ospf neighbor

OSPF Neighbor Information

Rxmt Helper

Router ID Pri IP Address NbIfState State QLen Events Status

--------------- --- --------------- --------- -------- ----- ------ ------

1.1.1.1 n/a 10.2.1.1 n/a FULL 0 6 None

Viewing OSPF information 173