KB.15.15

[all] Enable/disable all PIM notification traps.

[neighbor-loss] Enable/disable the notification trap sent when the

timer for a multicast router neighbor expires and the

switch has no other multicast router neighbors on

the same VLAN with a lower IP address.

Default: Disabled

[hardware-mrt-full] Enable/disable notification trap when the

hardwareMRT is full (2048 active flows.) In this state,

any additional flows are handled by the software

MRT, which increases processing time for the

affected flows.

Default: Disabled

[software-mrt-full] Enable/disable notification trap when the routing

switch'ssoftware MRT is full (routing resources for

active flows are exhausted.)

Default: Disabled

NOTE: In this state, the routing switch does not

accept any additional flows.

38 PIM-DM (Dense Mode)