KB.15.15

Example 54 Listing for a router that is not configured as a C-RP

HP Switch(pim)# show ip pim rp-candidate

This system is not a Candidate-RP

Example 55 Full C-RP configuration listing

HP Switch(pim)# show ip pim rp-candidate config

Status and Counters - PIM-SM C-RP Information

C-RP Admin Status : This system is not a C-RP

C-RP Address : 120.10.10.2

C-RP Hold Time : 150

C-RP Advertise Period : 60

C-RP Priority : 192

C-RP Source IP VLAN : 120

Group Address Group Mask

--------------- ---------------

239.10.10.240 255.255.255.252

Example of a C-RP

configuration for supporting

multicast groups in the range of

239.10.10.240 to 239.10.10.243.

Indicates that this

router is not enabled

for C-RP operation.

Status Line

Configuration

Listing non-default C-RP configuration settings

The show running command includes the current non-default C-RP configuration settings on the

router.

Figure 18 Non-default C-RP configuration listing

PIM-SM overview

In a network where IP multicast traffic is transmitted for multimedia applications, such traffic is

blocked at routed interface (VLAN) boundaries unless a multicast routing protocol is running.

92 PIM-SM (Sparse Mode)