Release Notes KB.15.15.0007

Return to Contents page 2 of 2
IPv6 (CR_0000148594) - IPv6 Router Advertisements that indicate an off-link prefix are not set as "preferred" in
the switch, which causes incorrect information in the output of show ipv6, and can affect connectivity to hosts that
use IPv6 Stateless Address Autoconfiguration. This issue also causes the sFlow "Agent Address" to be listed as
0.0.0.0.
Logging (CR_0000146773) - In an IPv4 plus IPv6 environment, upon switch bootup the event log displays the set
of source IP policy ("srcip") messages twice. With this fix, IPv6 policy messages are distinguished from IPv4 policy
messages.
sFlow (CR_0000147660) - In an IPv6-only environment with Stateless Address Autoconfiguration, sFlow
incorrectly uses the link-local address as the agent ID.
Transceivers (CR_0000146528) - After rebooting the switch, the configuration parameter speed-duplex auto-
100 (for a J8177C gigabit-copper transceiver slot) is removed from the config file.
© Copyright 2014 Hewlett-Packard Company, L.P.
The information contained herein is subject to
change without notice.
June 2014