KB.15.15

Example 96 Loop protection enabled in preference to STP

Operating notes

• The receiver-action option can be configured on a per-port basis and can only be

enabled after loop protection has been enabled on the port. All other configuration options

(disable-timer, trap loop-detected, and transmit interval) are global.

• The trap option refers to a SNMP trap.

• Regardless of how the receiver-action and trap options are configured, all detected

loops will be logged in the switch's event log.

• The

no loop-protect port

command will not remove a receive-action configuration line from the running configuration

unless this option is set to receive-action send-disable.

• If loop-protect is enabled in port mode, it cannot also be enabled in VLAN mode, and

vice-versa.

130 Multiple instance spanning tree operation