KB.15.15

Example 118 Viewing the global RPVST+ configuration per VLAN

HP Switch(config)#: show spanning-tree config vlan 20

Spanning Tree Information

STP Enabled [No] : Yes

Mode : RPVST

Extended System ID : Enabled

Ignore PVID Inconsistency : Disabled

Switch MAC Address : 002347-587b80

RPVST Enabled : Enabled

VLAN ID : 20

Switch Priority : 32768

Forward Delay : 15

Hello Time : 2

Max Age : 20

Admin Root Bridge : Not Configured

Path Port

Port Type Cost Priority

----- ---------- --------- ---------

9 100/1000T 20000 128

20 100/1000T 200000 128

21 100/1000T 20000 128

Viewing the global RPVST+ configuration per port

Syntax:

show spanning-tree [ethernet] port-list config

Lists the spanning tree port parameter settings (global and per VLAN) for only the

specified port(s) and/or trunk(s). You can list data for a series of ports and port

trunks by specifying the first and last port or trunk of any consecutive series of ports

and trunks. For example, to display data for ports 9, 11, 12, 21 and trk1, use this

command: show spanning-tree 9,11,12,21,trk1 config

154 Rapid per-VLAN spanning tree (RPVST+) operation