KB.15.15

Jumbo Indicates whether a VLAN is configured for Jumbo

packets.

Port Information Lists the ports configured as members of the VLAN.

DEFAULT Shows whether a port is a tagged or untagged member

of the listed VLAN.

Unknown VLAN Shows whether the port can become a dynamic member

of an unknown VLAN for which it receives an

advertisement. GVRP must be enabled to allow dynamic

joining to occur.

Status Shows whether the port is participating in an active link.

Example 4 Viewing information for a specific static VLAN

HP Switch(config)#:show vlans 22

Status and Counters - VLAN Information - VLAN 22

VLAN ID : 22

Name : VLAN22

Status : Port-based

Voice : Yes

Jumbo : No

Port Information Mode Unknown VLAN Status

---------------- -------- ------------ ----------

12 Untagged Learn Up

13 Untagged Learn Up

14 Untagged Learn Up

15 Untagged Learn Down

16 Untagged Learn Up

17 Untagged Learn Up

18 Untagged Learn Up

Example 5 Viewing information for a specific dynamic VLAN

Shows the information displayed for a specific dynamic VLAN. The show vlans command lists

this data when GVRP is enabled and at least one port on the switch has dynamically joined the

designated VLAN.

HP Switch(config)#: show vlans 22

Status and Counters - VLAN Information - VLAN 22

VLAN ID : 33

Name : GVRP_33

Status : Dynamic

Voice : No

Jumbo : No

Port Information Mode Unknown VLAN Status

---------------- -------- ------------ ----------

6 Auto Learn Up

Customizing the show VLANs output

Syntax

show vlans custom [port port-list] column-list

20 Static Virtual LANs