Advanced Traffic Management Guide K/KA/KB.15.15

Applying a zone policy to a ONE application
To apply a zone policy to a ONE Application, you can complete one of the following steps:
• Enter the zone-service-policy command on the HP 8200zl or 5400zl switch
• Use the ONE application's management interface to apply the zone policies
To apply zone policies through the ONE application, consult the HP Installation and Getting Started
Guide for that application.
To apply a zone service policy from the switch CLI, enter the following command from the global
configuration context.
Syntax:
[no] zone-service-policy policy-name zone [ enable | disable | update ]
bind [Ethernet] logical port appname application name appinstance
instance description [ fail-action [ bypass | block ]] [ expire [
app-down | permanent | slot-down ]]
policy-name Specifies the name of the policy you configured with the policy
command.
enable|disable|update Makes the policy active, inactive, or updates
options that have been assigned to a policy.
logical port Specifies the HP AllianceONE Extended
Services zl Module's port 1, using the format
slot1.
application name Specifies the name of the ONE application.
See the Installation and Getting Started
Guide for the ONE application.
instance description Specifies the name of the application and
the slot in which it resides. See the
Installation and Getting Started Guide for
the ONE application.
fail-action bypass | block Specifies the action the switch will take if the
ONE application is unavailable). Enter
bypass if you want the switch to ignore the
policies and not intercept traffic if the ONE
application is unavailable. Specify block
if you want the switch to drop traffic that
matches your policy criteria if the ONE
application is unavailable.
expire Determines if the policy persists if the ONE
application is down or unavailable.
app-down Specifies if you want the policy to expire if
the ONE application is unavailable. Specify
permanent if you do not want the policy
to ever expire.
slot-down Specifies if you want the policy to expire if
the slot in which the ONE application is
installed is unavailable.
368 Classifier-based software configuration