Advanced Traffic Management Guide K/KA/KB.15.15

Edge port configuration
For this configuration no edge ports were configured. Be aware if edge ports are not configured.
It will increase convergence times. Below is an example of the commands required to configure a
range of ports for untagged VLAN 23. Be sure to edit command for correct ports and VLANS.
IDF1WEST(config)#: vlan 3
IDF1WEST(vlan-23)#: untagged A1-A20
IDF1WEST(vlan-23)#: exit
IDF1WEST(config)#: spanning-tree A1-A20 edge-port
Show running-config
IDF1WEST(config)#: show run
Running configuration:
; J8697A Configuration Editor; Created on release #:K.12.02
hostname "IDF1WEST"
max-vlans 50
module 2 type J8702A
trunk B23-B24 Trk1 Trunk
trunk B21-B22 Trk2 Trunk
ip default-gateway 10.1.1.1
snmp-server community "public" Unrestricted
vlan 1
name "DEFAULT_VLAN"
untagged B1-B20,Trk1-Trk2
ip address 10.1.1.21 255.255.255.0
exit
vlan 3
name "VLAN3"
tagged Trk1-Trk2
no ip address
exit
vlan 4
name "VLAN4"
tagged Trk1-Trk2
no ip address
exit
vlan 5
name "VLAN5"
tagged Trk1-Trk2
no ip address
exit
vlan 7
name "VLAN7"
tagged Trk1-Trk2
no ip address
exit
vlan 8
name "VLAN8"
tagged Trk1-Trk2
no ip address
exit
vlan 9
name "VLAN9"
tagged Trk1-Trk2
no ip address
exit
vlan 23
name "VLAN23"
no ip address
exit
vlan 24
name "VLAN24"
388 Spanning tree interoperability between HP and Cisco switches