WB 15.15

Controller Id Connection Status Connection State Secure Role

------------- ----------------- ---------------- ------ ------

1 Disconnected Void No Equal

Auxiliary Auxiliary Auxiliary

Controller Id Conn. index Auxiliary ID Conn. Status Conn. State Type

------------- ----------- ------------ ------------- ----------- ----

1 1 1 Disconnected Void TCP

#HP-8206zl# show run

openflow

controller-id 1 ip 20.0.0.2 controller-interface vlan 1

auxiliary-connection 1 port 6633 type tcp

instance "t1"

listen-port

member vlan2

controller-id 1 auxiliary-connection 1

version 1.3

enable

exit

enable

exit

Associating the auxiliary connection index with an OpenFlow instance

Syntax

(openflow-instance-name)-# auxiliary-connection 1

Auxiliary connection index to be associated with the main connection

Range: 1–128

auxiliary connection 1

Calls out only connection supported per main controller connection.

Configuring number of software flow tables per instance

Syntax

openflow-instance-name # software-flow-table value

Configures the number of software flow tables required for an instance.

Default: 1, Range: 1–4

This is applicable only for an OpenFlow version 1.3 instance.

OpenFlow instance connection interruption mode

Use this to set behavior when an OpenFlow instance on the switch loses connection with the

controller.

Syntax

[no] openflow instance [instance-name]

connection-interruption-mode { fail-secure | fail-standalone

}

fail-secure

If the switch loses connection with all controllers, packets and messages intended

for controllers are dropped. Flows continue to expire according to their time-outs.

Default: fail-secure

Associating the auxiliary connection index with an OpenFlow instance 23