WB 15.15

Example

openflow# limit multiport-filter-usage [1-100]

0-100: Maximum percentage of Multiport filters used by OpenFlow.

HP-3500yl-24G-PoEP# show openflow multiport-filter-limit

Total Multiport Filters: 2037

Filters Filters Filters

Features Allocated Used Free

------------ ---------- ----------- -----------

OpenFlow 1024 0 1024

Hardware statistics refresh rate

Syntax

openflow-instance-name [#]hardware statistics|refresh rate

policy-engine-table <value>

Refresh rate for policy engine table statistics.

Default: 0–3600

Backing up your configuration (optional)

Dual management module in E8200 platforms is supported. Flow configuration is synchronized

across management modules and flow table preserved during switchover.

See ‘Chassis Redundancy’ in the Management and Configuration Guide for your switch.

Configuring VLANs

For information on configuring and verifying VLANs, see the Advanced Traffic Management Guide

for your switch.

Configuring and verifying routing

For information on configuring and verifying routing, see the Multicast and Routing Guide for your

switch.

Configuring physical and logical ports

For information on configuring and verifying ports, see the ‘Port Status and Configuration’ chapter

in the Management and Configuration Guide for your switch.

Hardware statistics refresh rate 31