Manualshelf

HP OpenFlow 1.3 Administrator Guide Wired Switches K/KA/KB/WB 15.15

ManualsBrandsHP ManualsNetwork HardwareHP 5412R zl2 Switch
51525354555657585960
Meshing cannot be configured when OpenFlow is enabled.
Enable OpenFlow with QinQ
Enabling OpenFlow when Q-in-Q is enabled will result in an error message similar to the following.
OpenFlow cannot be enabled when Q-in-Q is configured.
Enabling QinQ with OpenFlow
Enabling Q-in-Q when OpenFlow is enabled will result in an error message similar to the following.
Q-in-Q cannot be configured when OpenFlow is enabled.
Enabling transparent mode
Enabling Transparent Mode (TRmode) when OpenFlow is enabled will result in an error message
similar to the following.
Transparent Mode cannot be enabled when OpenFlow is enabled.
Enabling OpenFlow with transparent mode
Enabling OpenFlow when Transparent Mode is enabled will result in an error message similar to
the following.
OpenFlow cannot be enabled when Transparent Mode is enabled.
Enabling remote mirror endpoint
Enabling Remote Mirror Endpoint when OpenFlow is enabled generates an error message similar
to the following.
Remote Mirror Endpoint cannot be configured when OpenFlow
is enabled.
Enabling OpenFlow with remote mirror endpoint
Enabling OpenFlow when Remote Mirror Endpoint is enabled generates an error message similar
to the following.
OpenFlow cannot be enabled when Remote Mirror Endpoint is
configured.
Adding a port
Adding a port to a trunk that is part of an OpenFlow member VLAN generates an error message
similar to the following.
Trunk in use by an OpenFlow instance may not be modified.
Deleting a port
Deleting a port from a trunk that is part of an OpenFlow member VLAN generates an error message
similar to the following.
Trunk in use by an OpenFlow instance may not be modified.
Moving a trunk
When moving a trunk that is part of an OpenFlow member VLAN from one VLAN to another VLAN
generates an error message similar to the following.
Trunk in use by an OpenFlow instance may not be moved.
Tagging/Untagging trunk
Toggling membership of the trunk from tagged to untagged when that trunk is part of an OpenFlow
member VLAN generates an error message similar to the following.
Trunk in use by an OpenFlow instance may not be modified.
Error messages 51