HP OpenFlow 1.3 Administrator Guide Wired Switches K/KA/KB/WB 15.15
No limiters found for this OpenFlow instance.
VLAN error messages
Member to controller VLAN
Specifying a member VLAN as a controller VLAN will result in an error message similar to the
following.
The specified VLAN is already member of OpenFlow instance
instance-name and hence cannot be added as controller
interface.
VLAN in an OpenFlow instance
Specifying a VLAN that is already a part of a different OpenFlow instance will result in an error
message similar to the following.
The VLAN specified is already a member of another OpenFlow
instance.
More than one VLAN
Specifying more than one VLAN per instance will result in an error message similar to the following.
Only one VLAN can be configured as a member of an OpenFlow
instance.
VLAN range
Specifying a VLAN that is outside the allowed VLAN range will result in an error message similar
to the following.
Invalid Input : VLAN-ID
Management VLAN
When the user tries to add the management VLAN to an OpenFlow instance will result in an error
message similar to the following.
A management VLAN cannot be a member of an OpenFlow instance.
Configure VLAN as management
When the user tries to configure an OpenFlow instance VLAN as management VLAN will result in
an error message similar to the following.
Management VLAN cannot be configured. VLAN <n> is member of
an OpenFlow instance.
Dynamic VLAN
When a dynamic VLAN is added as a member VLAN will result in an error message similar to the
following.
Dynamic VLAN cannot be added as a member VLAN.
Controller interface
Adding a controller interface as member VLAN will result in an error message similar to the
following.
Controller interface cannot be added as member VLAN.
54 Troubleshooting OpenFlow










