HP Power over Ethernet (PoE/PoE+) Planning and Implementation Guide

14-10
Planning and Implementation for the HP 5400R zl2 Switches
PoE/POE+ Provisioning
Table 14-2. PoE Power Provisioning for the 5400R zl2 Switches for PoE/PoE+
PoE/PoE+ Allocation Using LLDP Information
A PoE port can automatically configure certain PoE link partner devices if the
device supports advertising of its PoE needs.
By enabling PoE LLDP detection, available information about the power
requirements of the PD may be used by the switch to configure the power
allocation. The initial configuration for PoE ports may change if more accurate
configuration information is provided by way of LLDP.
For more information, see the Management and Configuration Guide for
your switch at www.hp.com/networking/support. Auto search on “5400”, select
your switch model from the list, click Display selected, then click on the links
that include the word “manuals” in them to get to the manuals web page.
PoE/PoE+ Devices Internal Only (J9830A)
115-127V 200-240V
PoE/PoE+ for 5406R zl2 Switch With main+aux:
1 - 2500 watts
2 - 4624 watts
With main only:
1 -1100 watts
2 - 2034 watts
With main+aux:
1 - 2500 watts
2 - 4624 watts
With main only:
1 - 1100 watts
2 - 2034 watts
PoE/PoE+ for 5412R zl2 Switch With main+aux:
1 - 2500 watts
2 - 4624 watts
3 - 6936 watts
4 - 9248 watts
With main only:
1 - 1100 watts
2 - 2034 watts
3 - 3051 watts
4 - 4068 watts
With main+aux:
1 - 2500 watts
2 - 4624 watts
3 - 6936 watts
4 - 9248 watts
With main only:
1 - 1100 watts
2 - 2034 watts
3 - 3051 watts
4 - 4068 watts