HP Power over Ethernet (PoE/PoE+) Planning and Implementation Guide

14-11
Planning and Implementation for the HP 5400R zl2 Switches
PoE/POE+ Provisioning
PoE Power Requirements
PoE/PoE+ Modules.
There are five zl modules that can provide PoE/PoE+ power to the 5400R zl2
switches. A minimum of 17 watts is required to power up a port used for PoE;
a minimum of 33 watts is required to power up a port used for PoE+. All
modules are capable of providing full POE+ power.
■ HP 24-Port Gig-T PoE+ v2 zl Module (J9534A)
■ HP 20-Port Gig-T PoE+/4 Port SFP v2 zl Module (J9535A)
■ HP 20-Port Gig-T PoE+/2 Port 10-GbE SFP+ v2 zl Module (J9536A)
■ HP 24-Port 10/100 PoE+ v2 zl Module (J9547A)
■ HP Switch 12-Port 1Gig-T PoE+ / 12-Port SFP v2 zl Module (J9637A)