HP Power over Ethernet (PoE/PoE+) Planning and Implementation Guide

1-7
Introduction
Quick Reference Table
HP 2610-24-PPoE 10/100 12
8 @ 15.4 watts
12 @ 10.5 watts
4 J8168A
J8169A
126 watts available to ports 1-12
(provided by the internal
source). 408/204
3
watts
available, provided by the EPS
source.
HP 2610-24-PoE 10/100 24
24 @ 15.4 watts
4 J8168A
J8169A
406 watts available to ports 1-24
(provided by the internal
source). 408/204
3
watts
available, provided by the EPS
source.
HP 2610-48-PoE 10/100 48
48 @ 15.4 watts
4 J8168A
J8169A
406 watts available to ports 1-24
(provided by the internal
source). 408/204
3
watts
available to ports 25-48
(provided by the EPS source).
HP 2615-8-PoE 10/100 8
4 @ 15.4 watts
8 @ 7.5 watts
2
2
J9565A 67 watts available to ports 1-8
(provided by the internal
source).
HP 2620-24-PPoE+ 10/100/1000 24
4 @ 30 watts
8 @ 15.4 watts
12 @ 7.5 watts
2 N/A 126 watts internal only.
HP 2620-24-PoE+ 10/100/1000 24
24 @ 30 watts
2 J9443A 382 watts available to ports 1-24
(provided by the internal
source). 388 watts available as
backup in case of failure,
provided by the external
source.
HP 2620-48-PoE+ 10/100/1000 48
24 @ 30 watts
4
48 @ 15 watts
4 J9443A 382 watts available to ports 1-48
(provided by the internal
source). 388 watts available as
backup in case of failure,
provided by the external
source.
HP 2910-24G-PoE+ al 10/100/1000 24
24 @ 30 watts
4
4
2
J9146A
382 watts available to ports 1-24
(provided by the internal
source).
HP 2910-48G-PoE+ al 10/100/1000 48
24 @ 30 watts
4
48 @ 15 watts
4
2
J9148A 382 watts available to ports 1-48
(provided by the internal
source).
Model/
Device
Port Type PoE Port Count/
PoE watts per
port
1
Gigabit
Uplink
Ports
RPS/EPS Maximum Power Internal and
External
Power
Fault
Locator
Console
Spd mode: off = 10 Mbps
2 flash = 100 Mbps
on = 1 Gbps
3 flash = 10 Gbps
*
LED
Mode
Clear
Reset
PoE+ Integrated 10/100/1000Base-T Ports (1 - 24T)  Ports are Auto-MDIX
Test
Tmp
Status
Dual-Personality Ports: 10/100/1000-T (T) or SFP (S)
!
Use only one (T or S) for each Port
PoE
Fan
21S
23S
22S 24S
FDx
Spd
PoE
Act
*
14
16
19
17
15
13
18
20
Link
Mode
23T
21T
22T 24T
Link
Mode
Status of the Back
Mdl
RPS
EPS
ProCurve Switch
2910bl-24G-PoE
J9146A
Link Mode
Link Mode
12
10
8
6
4
2
119
7
5
31
Link
Mode
Link
Mode
Usr
Auxiliary Port
PoE+
Power
Fault
Locator
Console
LED
Mode
Clear
Reset
PoE+ Integrated 10/100/1000Base-T Ports (1 - 48T)  Ports are Auto-MDIX
Test
Tmp
Status
Dual-Personality Ports: 10/100/1000-T (T) or SFP (S)
!
Use only one (T or S) for each Port
PoE
Fan
45S
47S
46S 48S
*
Spd mode: off=10 Mbps, 2 flash=100 Mbps, on=1 Gbps, 3 flash=10 Gbps
FDx
Spd
PoE
Act
*
38
40
43
41
39
37
12
10
8
6
4
2
11
9
7
5
3
1
42
44
Link
Mode
Link
Mode
Link
Mode
47T
45T
46T 48T
Link
Mode
Status of the Back
Mdl
RPS
EPS
ProCurve Switch
2910bl-48G-PoE
J9148A
Link Mode
Link Mode
24
22
20
18
16
14
2321
1917
1513
Link
Mode
Link
Mode
36
34
32
30
28
26
3533
31
29
2725
Link
Mode
Link
Mode
Usr
PoE+