HP Power over Ethernet (PoE/PoE+) Planning and Implementation Guide

4-5

Planning and Implementation for the HP 2530-PoE+ Switches

Planning the PoE Configuration

HP 2530-8 and 8G PoE+ Switch Configurations

The table in the example configuration contain entries that show the PoE/

PoE+ power available when the HP 2530-8-PoE+ or 8G-PoE+ Switch is used

to supply PoE or PoE+ power.

Figure 4-1. Example of an HP 2530-8G-PoE+ Switch (also applies to HP 2530-8-

PoE+ Switch)

Note: PoE or PoE+ is not supplied to any of the dual-personality ports.

Any 2 of the 8 ports can be used, not just the first two ports

Any 4 of the 8 ports can be used, not just the first four ports

Source of Power Watts

Available

Number of Ports Powered

and Average Watts/Port

Internal PoE+ Power

Supply

67 2 @ average 30 W each

4 @ average 15.4 W each

8 @ average 7.5 W each

HP 2530G-8G PoE+ Switch

Any 4 of the ports can receive

up to 15.4 Watts of PoE+ power

All 8 ports can receive up to

7.5 Watts of PoE power

Any 2 of the ports can receive

up to 30 Watts of PoE+ power