HP Power over Ethernet (PoE/PoE+) Planning and Implementation Guide

6-3
Planning and Implementation for the HP 2615 and HP 2915G Switches
Planning the PoE Configuration
HP 2615-8-PoE and HP 2915-8G-PoE Configurations
The table in the example configuration contain entries that show the PoE
power available when the HP 2615-8-PoE or HP 2915-8G-PoE is used to supply
PoE power.
Figure 6-1. Example of an HP 2615-8-PoE or HP 2915-8G-PoE Switch
Note: The Dual-Personality SFP ports and the corresponding RJ-45 ports do
not supply PoE power.
8 ports can receive up to
7.5 watts of PoE power
8 ports can receive up to
7.5 watts of PoE power
Source of Power Watts
Available
Number of Ports Powered
and Average watts/Port
Internal PoE Power
Supply
67 8 @ average 7.5 W each
4 @ average 15.4 W each