HP Switch zl2 Modules Installation Guide

2
HP Switch v2 zl Modules
HP 8-port 10-GbE SFP+
v2 zl Module (J9538A)
1
8 ports for installing any of the
supported HP transceivers. The
SFP+ ports do not support IEEE
802.3at PoE+.
HP 8-port 10GBase-T
v2 zl Module (J9546A)
2
8 twisted-pair ports with RJ-45
connectors for 10GBase-T
operation over Category 6 or better
100-ohm UTP or STP cable. PoE is
not supported on this module.
HP 24-port 10/100 PoE+
v2 zl Module (J9547A)
1
24 twisted-pair ports with RJ-45
connectors for 10/100 Base-TX
integrated operation over
Category 5 or better 100-ohm UTP
or STP cable. All ports have the
IEEE 802.3ab Auto MDI/MDI-X (HP
Auto-MDIX) feature and support
IEEE 802.3at PoE+.
HP 20-port Gig-T / 2-
port 10-GbE SFP+ v2 zl
Module (J9548A)
1
20 twisted-pair ports with RJ-45
connectors for 10/100/1000Base-T
and 2 ports for installing any of the
supported HP transceivers. All RJ-
45 ports have the IEEE 802.3ab
Auto MDI/MDI-X (HP Auto-MDIX)
feature. This module does not
support IEEE 802.3at PoE+.
HP 20-port Gig-T / 4-
port SFP v2 zl Module
(J9549A)
1
20 twisted-pair ports with RJ-45
connectors for 10/100/1000Base-T
and 4 ports for installing any of the
supported HP transceivers. All RJ-
45 ports have the IEEE 802.3ab
Auto MDI/MDI-X (HP Auto-MDIX)
feature. This module does not
support IEEE 802.3at PoE+.
Module Description