HP Switch zl2 Modules Installation Guide

1
HP Switch v2 zl Modules
HP Switch v2 zl Modules
For the HP 5400R zl2 Switches
Descriptions. The HP Switch v2 zl Modules are the second generation zl
modules and provide a variety of improved network connectivity options for
the HP 5400R zl2 switches. The following modules are currently available.
Module Description
HP 24-port Gig-T PoE+
v2 zl Module (J9534A)
1
24 twisted-pair ports with RJ-45
connectors for 10/100/1000Base-T
operation over Category 5 or better
100-ohm UTP or STP cable
(category 5e recommended for
Gigabit). All ports have the IEEE
802.3ab Auto MDI/MDI-X (HP
Auto-MDIX) feature and support
IEEE 802.3at PoE+.
HP 20-port Gig-T PoE+
/ 4-port SFP v2 zl
Module (J9535A)
1
20 twisted-pair ports with RJ-45
connectors for 10/100/1000Base-T
ports that support PoE+ and 4 ports
for installing any of the supported
HP transceivers. All RJ-45 ports
have the IEEE 802.3ab Auto MDI/
MDI-X (HP Auto-MDIX) feature
and support PoE+. The SFP ports
do not support IEEE 802.3at PoE+.
HP 20-port Gig-T PoE+
/ 2-port 10-GbE SFP+ v2
zl Module (J9536A)
1
20 twisted-pair ports with RJ-45
connectors for 10/100/1000Base-T
ports that support PoE+ and 2 ports
for installing any of the supported
HP transceivers. All RJ-45 ports
have the IEEE 802.3ab Auto MDI/
MDI-X (HP Auto-MDIX) feature
and support PoE+. The SFP+ ports
do not support IEEE 802.3at PoE+.
HP 24-port SFP v2 zl
Module (J9537A)
1
24 SFP ports for connecting any of
the supported HP transceivers.
These ports do not support IEEE
802.3at PoE+.