KB.15.15

Figure 136 Example of switch configuration with SFTP enabled

If you enable SFTP and then later disable it, TFTP and auto-TFTP remain disabled unless they are

explicitly re-enabled.

Operating rules are:

• The TFTP feature is enabled by default, and can be enabled or disabled through the CLI, the

Menu interface (see Figure 137 (page 294)), or an SNMP application. Auto-TFTP is disabled

by default and must be configured through the CLI.

Figure 137 Using the Menu interface to disable TFTP

• While SFTP is enabled, TFTP and auto-TFTP cannot be enabled from the CLI. Attempting to

enable either non-secure TFTP option while SFTP is enabled produces one of the following

messages in the CLI:

SFTP must be disabled before enabling tftp.

SFTP must be disabled before enabling auto-tftp.

294 File transfers