Multicast and Routing Guide K/KA/KB.15.15

Example
Example 153 statistics command output if global VRRP is disabled
VRRP Global Statistics Information
VRRP Enabled : No
Viewing global VRRP statistics only
Syntax:
show vrrp statistics global
show vrrp ipv6 statistics global
Displays the global VRRP statistics for the router:
• VRRP Enabled [Yes/No]
• Invalid VRID Pkts Rx: VRRP packets received for a VRID that is not configured
on the specific VLAN of the VRRP router.
• Checksum Error Pkts Rx: VRRP packets received with a bad checksum
• Bad Version Pkts Rx: VRRP advertisement packets received with a version
number other than 2 or 3.
• Virtual Routes Respond to Ping Requests [Yes/No]
Example
Example 154 Global VRRP statistics output
The output is the same for IPv4 and IPv6.
HP Switch(config)# show vrrp statistics global
VRRP Global Statistics Information
VRRP Enabled : Yes
Invalid VRID Pkts Rx : 0
Checksum Error Pkts Rx : 0
Bad Version Pkts Rx : 0
Virtual Routers Respond to Ping Requests : No
Viewing statistics for all VRRP instances on the router
Syntax:
show vrrp [statistics]
show vrrp ipv6 statistics
Displays the following VRRP statistics:
• Global VRRP statistics for the router
• VRRP statistics for all VRs configured on the router:
State Indicates whether the router is a backup or
the current master of the VR.
Uptime The amount of time the router has been up
since the last reboot.
Virtual MAC Address The virtual MAC address for the VR instance.
268 Virtual Router Redundancy Protocol (VRRP)