Multicast and Routing Guide K/KA/KB.15.15
[state] Indicates whether the outbound VLAN and next-hop
router for the current multicast flow are receiving
datagrams.
Pruned The routing switch has not detected
any joins from the current multicast
flow and is not currently forwarding
datagrams in the current VLAN.
Forwarding The routing switch has received a join
for the current multicast flow and is
forwarding datagrams in the current
VLAN.
Up Time (Sec) The natural state of a downstream interface in PIM-DM
is to forward multicast flows and DM will flood a new
flow out all interfaces on a router where there are
connected PIM-DM neighbors and/or joined hosts. If
there are ultimately no receivers for the flow
downstream, the flow will be pruned back to the
originator router. This prune state is maintained on all
PIM-DM routers by state refresh message sends by the
originator and corresponding prune replies from
downstream routers. However if a prune reply is not
received (i.e. there is now a receiver), expire time
indicates how long before the interface will return to a
forwarding state.
Expire Time (sec) The natural state of a downstream interface in PIM-DM
is to forward multicast flows and DM will flood a new
flow out all interfaces on a router where there are
connected PIM-DM neighbors and/or joined hosts. If
there are ultimately no receivers for the flow
downstream, the flow will be pruned back to the
originator router. This prune state is maintained on all
PIM-DM routers by state refresh message sends by the
originator and corresponding prune replies from
downstream routers. However if a prune reply is not
received (i.e. there is now a receiver), expire time
indicates how long before the interface will return to a
forwarding state.
Displaying PIM data and configuration settings 49










