Event Log Message Reference Guide 2013/06

13
Event Log Messages
228 Traffic filter configured in row
<row-num> is not active
warning The traffic filter in the specified row is not active.
RMON_FILTER_NOT_ACTIVE
229 Traffic filter configured in row
<row-num> is not valid
warning The traffic filter configured in the specified row is not valid.
RMON_FILTER_NOT_VALID
230 Traffic filter configured in row
<row-num> was deleted
warning The traffic filter configured in the specified row was deleted.
RMON_FILTER_DELETED
231-
232
— — Reserved
RMON_FILTER_RESERVED1 - 2
233 “\”public\” community deleted.
Net Mgmt may have problems”
“snmp: ‘public’ community
deleted. Net Mgmt may have
problems
warning The community name “public” was deleted. Network
management may not function correctly without the presence of
this community name.
RMON_SNMP_PUBLIC_DELETED
234 Too many manager addrs for
<src-ip-addr> - ignoring rest
warning Unused
RMON_SNMP_TOO_MANY_MANAGERS
235 Too many communities specified
- ignoring <community-name>
warning Too many community names have been configured; the specified
community name is ignored.
RMON_SNMP_TOO_MANY_COMMUNITIES
236 SNMP Security access violation
from <src-ip-addr>
warning There has been a security access violation from the specified
source IP address.
RMON_SNMP_SECURITY_ACCESS_VIOLATION
237 SNMP Security write violation
from <src-ip-addr>
warning There has been an SNMP security write violation from the
specified source IP address.
RMON_SNMP_SECURITY_SET_VIOLATION
238 Alarm <alarm-name> warning The specified alarm occurred.
RMON_SNMP_ALARM
239 SNMP community configured in
row <row-num> not active
warning The SNMP community name in the specified row is not active.
RMON_SNMP_COMM_NOT_ACTIVE
240 SNMP manager address
configured in row <row-num> not
active
warning The SNMP manager address in the specified row is not active.
RMON_SNMP_MGR_NOT_ACTIVE
241 SNMP trap receiver configured
in row <row-num> not active
warning The SNMP trap configured in the specified row is not active.
RMON_SNMP_TRAP_NOT_ACTIVE
242 Event <event-desc> warning The specified event occurred.
RMON_SNMP_EVENT
243 SNMP changed Engine Id to <id-
num>. The user table may need to
be re-entered
fatal The engine ID changed. The new value needs to be entered in the
SNMP user table.
RMON_SNMP_ENGINEID_CHANGED
244 SNMP Engine boots value
maxed. SNMPv3 Administration
may no longer work.
fatal The boots value of the SNMP engine is maxed out. SNMPv3 may
no longer work correctly.
RMON_SNMP_ENGINE_BOOTS_MAXED
# Message Severity Description