Event Log Message Reference Guide 2013/06

23
Event Log Messages
396 Port <port-num> is moved from
trunk <trunk-num> to <trunk-
num>
info The LACP trunk port has been moved to another trunk group.
RMON_LACP_PORT_MOVED_FROM_DYNX_TO_DYNY
397 LACP port <port-num> is moved
to trunk <trunk-num>
info The LACP trunk port has been moved to the specified trunk group.
RMON_LACP_PORT_MOVED_TO_DYNX
398 Port <port-num> is removed from
trunk <trunk-num>.
info The LACP port has been removed from the trunk group.
RMON_LACP_PORT_REMOVED_FROM_DYNX
399 Stack Protocol enabled info The stacking protocol is enabled.
RMON_STACK_ENABLE
400 Stack Protocol disabled info The stacking protocol is disabled.
RMON_STACK_DISABLE
401 — debug Unused
RMON_STACK_GENERIC
402 Stack member <mac-addr> lost warning Communication with the specified switch has been lost. The
address is unreachable.
RMON_FF_UNREACHABLE_STACK_MEMBER
403 DHCP relay agent feature
enabled
info The DHCP relay agent feature has been enabled.
RMON_DHCPR_ENABLED
404 DCHP relay agent feature
disabled
info The DHCP relay agent feature has been disabled.
RMON_DHCPR_DISABLED
405 Port <port-num> xcvr hot-swap
insert
Port <port-num> xcvr inserted.
Need reboot.
Port <port-num> xcvr inserted.
Remove/install module.
info There has been a transceiver change. Reboot the switch.
RMON_PPMGR_XCVR_HOTSWAP_INSERT
406 Port <port-num> xcvr hot-swap
remove
Port <port-num> xcvr removed
info A transceiver has been removed.
RMON_PPMGR_XCVR_HOTSWAP_REMOVE
407 Port <port-num> new xcvr invalid
type and/or speed
info The new transceiver is an invalid type and/or runs at an incorrect
speed.
RMON_PPMGR_XCVR_HOTSWAP_INVALID
408 Port <port-num> xcvr type
change. Check switch config
info The transceiver has been changed in the specified port. Check
the switch configuration.
RMON_PPMGR_XCVR_HOTSWAP_TYPECHG
409 Port <port-num> GigT xcvr invalid
mode change. Need reboot.
info The gigabit-T transceiver on the specified port had an invalid
mode change. The switch needs to be rebooted.
RMON_PPMGR_XCVR_HOTSWAP_GIGTMDCHG
410 Client enabled debug The SNTP client was enabled.
RMON_SNTP_ENABLED
411 Timed out on server <ip-addr> info The specified server timed out.
RMON_SNTP_TIMEOUT_SERVER
# Message Severity Description