Event Log Message Reference Guide 2013/06

26
Event Log Messages
445 Cannot accept switch 1600/24xx/
4000/8000 into mesh
warning The 1600, 4000, 8000 and Series 2400 switches cannot be part of
a mesh.
RMON_LDBAL_DUP_MAC_MULTI_VLAN_ERROR
446 Max hop count exceeded. Check
your mesh topology.
warning The maximum hop count was exceeded. Check the topology of
the mesh.
RMON_LDBAL_MAX_HOP_EXCEEDED
447 Port <port-num> - initialized info The port was initialized for load balancing.
RMON_LDBAL_PORT_INITIALIZED
448 Port <port-num> disabled due to
faulty link partner
warning The port was disabled due to an invalid peer in the link.
RMON_PPMGR_FAULTY_PARTNER
449 Port <port-num> RJ-45 is enabled info The RJ-45 port is enabled.
RMON_PPMGR_DUALPHY_RJ45_ENABLED
450 Port <port-num> mini_GBIC is
enabled
info The mini-GBIC port is enabled.
RMON_PPMGR_DUALPHY_FIBER_ENABLED
451 Unsupported protocol. Upgrade
<mac-addr> firmware
warning The protocol is not supported. You must upgrade the firmware.
RMON_LDBAL_PROTOCOL_NOT_SUPPORTED
452 Inconsistent <mac-addr> config
with <config-type> - <config-
type>
warning There is a mismatch in configuration type across the mesh with
the switch at the specified MAC address. According to mesh
rules, the configuration mismatch is not allowed.
Valid configuration types are: STP, RSTP, MSTP, GVRP, IGMP, CDP,
802.1x, Jumbo, LLDP, VLAN, or OS version.
RMON_LDBAL_ATTRIBUTE_MISMATCH
453 Received invalid meshing mode
pkt from <mac-addr> - <mac-
addr>
warning An invalid meshing packet was received from the specified MAC
address range.
RMON_LDBAL_RECV_DIFF_MODE_PKT
454-
462
— — Reserved
RMON_LDBAL_RESERVED_1 - 9
463 SSL HTTP server enabled on TCP
port <port-num>
info A Secure Socket Layer (SSL) connection is enabled on the
specified TCP port.
RMON_SSL_SERVER_UP
464 SSL HTTP server disabled info You are unable to connect with SSL because the SSL server is
disabled.
RMON_SSL_SERVER_DOWN
465 SSL HTTP startup failed’ no RSA
key present
warning The SSL HTTP failed to start because you have not generated a
certificate key. For information on how to generate a server
certificate before enabling SSL, refer to the “Configuring Secure
Socket Layer (SSL)” chapter in the Access Security Guide.
RMON_SSL_KEY_MISSING
466 SSL HTTP startup failed: no
certificate present
warning The SSL HTTP failed to start because the certificate was not
present.
RMON_SSL_CERT_MISSING
467 SSL HTTP startup failed: cert/
RSA key pair mismatch
warning SSL HTTP did not start because there was a certificate/RSA key
pair mismatch.
RMON_SSL_CERT_KEY_MISMATCH
# Message Severity Description