Event Log Message Reference Guide 2013/06

35
Event Log Messages
604 Unable to alloc a buf of size
<bytes> for <data-flow>
fatal Multicast routing is unable to acquire memory for a flow. Router
memory is oversubscribed. Reduce the number of VLANs or the
number of features in use. Remedies include one or more of the
following:
• Reduce the number of configured VLANs by moving some
VLANs to another router.
• Free up system resources by disabling another feature, such
as one of the spanning-tree protocols or either the RIP or the
OSPF routing protocol. (Unless you are using static routes, you
will need to retain a minimum of one unicast routing protocol.)
Another option that may help is to reduce the number of
configured QoS filters.
• Move some hosts that create multicast demand to another
router.
RMON_PIM_MALLOC_ERROR
605 Unable to alloc a msg buffer for
<msg-text>
fatal Multicast routing is unable to acquire memory for a flow. Router
memory is oversubscribed. Reduce the number of VLANs or the
number of features in use. Remedies include one or more of the
following:
• Reduce the number of configured VLANs by moving some
VLANs to another router.
• Free up system resources by disabling another feature, such
as one of the spanning-tree protocols or either the RIP or the
OSPF routing protocol. (Unless you are using static routes, you
will need to retain a minimum of one unicast routing protocol.)
Another option that may help is to reduce the number of
configured QoS filters.
• Move some hosts that create multicast demand to another
router.
RMON_PIM_NO_MSG_BUF
606 Unexpected state/event <state-
name>/<event-name> in <state-
machine> statemach
warning PIM received an event type in a state that was not expected.
RMON_PIM_UNEXPECTED_STATE_ERROR
607 Failed to alloc a PIM <data-type>
pkt
standard The router was unable to allocate memory for a PIM control
packet. Router memory is oversubscribed. Reduce the number of
VLANs or increase the hello delay and/or the override interval to
reduce the number of simultaneous packet transmissions. Note
that if the number of flows exceeds 1022, the excess flows are
routed in software, which reduces the number of packet
transmissions. In this case, reducing the number of flows by
moving some clients to other routers can help.
RMON_PIM_PKT_FALLOC_FAILURE
608 Send error (<failure-type>) on
<pkt-type> pkt on VID <vlan-id>
warning Indicates a send error on a packet. This can occur if a VLAN went
down right after the packet was sent. The message indicates the
failure type, the packet type, and the VLAN ID on which the packet
was sent.
RMON_PIM_PKT_SEND_FAILURE
# Message Severity Description