Event Log Message Reference Guide 2013/06

37
Event Log Messages
617 <alpha-str> pkt, src IP <ip-addr>
vid <vlan-id> (not a nbr)
info A PIM packet arrived from another router for which no neighbor
was found. May indicate a misconfiguration between the sending
and receiving router. May also occur if a connected router is
disconnected, then reconnected.
RMON_PIM_NO_NBR
618 Rcvd hello from <ip-addr> on vid
<vlan-id>
fatal Indicates a misconfiguration where two routers are directly
connected with different subnets on the same connected
interface.
RMON_PIM_MISCONFIG
619 Rcvd incorrect hello from <ip-
addr>
info Indicates receipt of a malformed hello packet (the packet does
not match the current specification). Ensure that compatible
versions of PIM-DM are being used.
RMON_PIM_BAD_HELLO
620 Rcvd unkwn opt <opt-nbr> in
<text-str> pkt from <ip-addr>
info The router received a PIM packet carrying an unknown PIM
option. The packet may have been generated by a newer version
of PIM-DM, or is corrupt. In most cases, normal PIM-DM
operation will continue.
RMON_PIM_UNKNOWN_OPT
621 Rcvd unkwn addr fmly <addr-
type> in <text-str> pkt from <ip-
addr>
info The router received a PIM packet with an unrecognized text string
encoding. As of February, 2004, the router recognizes IPv4
encoding.
RMON_PIM_UNKNOWN_ADDR_FAMILY
622 Rcvd <text-str> pkt with bad len
from <ip-addr>
info A peer router may be sending incorrectly formatted PIM packets.
RMON_PIM_BAD_LENGTH
623 Failed flow add: vid <vid>
<multicast group ip-addr>
<multicast source ip-addr>
info The switch failed to add a flow programmed into hardware.
RMON_PIM_HW_ADD_FAIL
624 Failed to initialize <text-str> as a
call back routine
fatal Indicates an internal error. Report the incident to your ProCurve
customer care center and re-install the router software.
RMON_PIM_IP_ADDR_CALLBACK_FAIL
625 I/F configured with IP <ip-addr>
on vid <vlan-id>
info Indicates that the interface (VLAN) has been configured with the
indicated IP address. At boot-up or when an IP address is
changed, the switch generates this message for each PIM-
configured VLAN.
RMON_PIM_IP_ADDR_CONFIG
626 I/F removal with IP <ip-addr> on
vid <vlan-id>
warning Indicates that a PIM interface (VLAN) has been removed from the
router as a result of an IP address change or removal.
RMON_PIM_IF_REMOVAL
# Message Severity Description