Event Log Message Reference Guide 2013/06

38
Event Log Messages
627 Unable to allocate <text-str>
table
fatal The router was not able to create some tables PIM-DM uses.
Indicates that the router is low on memory resources. Remedies
include one or more of the following:
• Reduce the number of configured VLANs by moving some
VLANs to another router.
• Free up system resources by disabling another feature, such
as one of the spanning-tree protocols or either the RIP or the
OSPF routing protocol. (Unless you are using static routes, you
will need to retain a minimum of one unicast routing protocol.)
Another option that may help is to reduce the number of
configured QoS filters.
• Move some hosts that create multicast demand to another
router.
RMON_PIM_TABLE_ALLOC_ERROR
628 Bad <param-name> in <pkt-
type> pkt from IP <ip-addr>
info The PIM packet was dropped due to a bad parameter in the packet
from the specified IP address.
RMON_PIM_PKT_BAD_PARM
629 PIM socket error info There was an error regarding the PIM socket, either on a sockopt
call or a recvfrom call.
RMON_PIM_SOCKET_ERROR
630 No RP for group <ip-addr> standard PIM-SM needed an RP for the indicated group address, but none
was found.
RMON_PIM_NO_RP_FOR_GROUP
631 No route to source/rp <ip-addr> standard PIM was unable to find a route to the specified IP address.
RMON_PIM_NO_ROUTE
632 Port <port-num> Duplex
Mismatch. Reconfig port to Full
Duplex.
warning There is a mismatch in the configured transmission mode
between the specified port and a peer. Reconfigure the data
transmission setting to Full Duplex.
RMON_PPMGR_DMM_SET_FULL_WARN
633 Port <port-num> Duplex
Mismatch. Reconfig port to Auto.
warning There is a mismatch in the configured transmission mode
between the specified port and a peer. Reconfigure the data
transmission setting to Auto (auto-configuration).
RMON_PPMGR_DMM_SET_AUTO_WARN
634 Front panel clear button pressed;
switch reset.
info A manual reset of the switch is taking place after pressing the
Clear button.
RMON_FPANEL_RESET_ON_CLEAR
635 Alternate password used to gain
access.
info A different password was used to access the switch.
RMON_FPANEL_ALT_PASS_USED
636 SFTP session from <ip-addr> info An SFTP session was started from the specified IP address.
RMON_SSH_SFTP_SESS
637 SCP session from <ip-addr> info An SCP session was started from the specified IP address.
RMON_SSH_SCP_SESS
638 Not enough space available to
complete the file transfer
info The file transfer was aborted due to insufficient memory.
RMON_SSH_FT_NO_MEM
# Message Severity Description