Event Log Message Reference Guide 2013/06

41
Event Log Messages
670 <msg-txt> fatal A fatal error has occurred while updating the software license.
RMON_HPESP_LICENSE_FATAL
671 <msg-txt> info The license update is successful.
RMON_HPESP_LICENSE_INFO
672 <msg-txt> warning An unexpected event occurred when accessing module
application data.
RMON_HPESP_APPLDATA_ERROR
673 <mod-num> flash write aborted;
write already in progress.
info Write-to-flash memory was aborted due to a write operation
already in progress.
RMON_HPESP_FLASH_WR_IN_PROG
674 <mod-num> shutdown
completed
info Shutdown of the X86 is completed.
RMON_HPESP_SHUTDOWN_COMPLETED
675 Invalid COS attribute value from
server for port <port-num>
info An invalid Class of Service (CoS) priority assignment for inbound
traffic was received on the port from the RADIUS server.
RMON_RADIUS_INVALID_COS_ATTRIBUTE
676 Invalid rate-limit-ingress
attribute value from server for
port <port-num>
info An invalid rate-limiting value for inbound traffic was received on
the port from the RADIUS server.
RMON_RADIUS_INVALID_RATE_LIM_INGRESS_ATTRIBUTE
677 Unable to reset COS value for
port <port-num>
info A CoS priority value could not be reset on the port by the RADIUS
server.
RMON_RADIUS_UNABLE_TO_RESET_COS_VALUE
678 Unable to reset rate-limiting-
ingress value for port <port-num>
info A rate-limiting value for inbound traffic could not be reset on the
port by the RADIUS server.
RMON_RADIUS_UNABLE_TO_RESET_RATE_LIMITING_INGRESS_VALUE
679 Unable to set rate-limiting-
ingress value for port <port-
num>. Unavailable resources.
info A rate-limiting value for inbound traffic could not be reset by the
RADIUS server due to insufficient resources.
RMON_RADIUS_RATE_LIMITING_INGRESS_RESOURCE_UNAVAIL
680 Unable to set COS value for port
<port-num>. Unavailable
resources.
info A CoS priority value could not be reset by the RADIUS server due
to insufficient resources.
RMON_RADIUS_COS_RESOURCE_UNAVAIL
681 Invalid port number. info An invalid port number was entered for a RADIUS-based
configuration.
RMON_RADIUS_INVALID_PORT_NUMBER
682 Radius: RADIUS user config too
large.
info The RADIUS-assigned configuration on the switch has too many
configured values.
RMON_RADIUS_TOO_LARGE_RESPONSE
683 There are no RADIUS servers
configured
info There are no RADIUS servers configured.
RMON_RADIUS_NOT_CONFIGURED
684-
685
— — Reserved
RMON_RADIUS_UNUSED_2 - 4
686 <msg-txt> fatal An upgrade to boot read-only memory (ROM) failed.
RMON_BOOTROM_UPGRADE_FAILED
# Message Severity Description