Event Log Message Reference Guide 2013/06

49
Event Log Messages
810 <sw-id> installed, key <key-
num>
info A software package has been installed with a license key on the
switch.
RMON_LICENSING_INSTALL
811 <sw-id> uninstalled, key <key-
num>
info A software package and its license key have been removed from
the switch.
RMON_LICENSING_UNINSTALL
812 Licensing error (<err-num>)
occurred, if this problem
continues please contact
support.
warning An error has occurred in ProCurve software licensing.
RMON_LICENSING_PROTEUSERROR
813-
816
— — Reserved
RMON_LICENSING_UNUSED_1 - 4
817 Slot <slot-num> self test failure warning The module in the specified slot failed its self-test and is not
usable.
RMON_CHASSIS_SLOT_FAIL_SELFTEST
818 Slot <slot-num> Invalid: This
switch supports only <mod-type>
modules
warning The module in the specified slot is not supported. Only the
specified type of modules are supported in the switch.
RMON_CHASSIS_SLOT_INVALID
819 Slot <slot-num> Invalid: Module
not supported by this software
version
warning The module in the specified slot is not supported by the current
software version.
RMON_CHASSIS_SLOT_UNSUPPORTED
820 Booted f/secondary. Primary
corrupt, needs reload!
Or
Booted f/primary. Secondary
corrupt, needs reload!
warning The main or backup version of the software image is corrupt.
Reload the image. The switch booted by using the valid software
image. Load a new image to replace the corrupt version.
RMON_SYSTEM_BOOT_IMAGE
821 Maximum system VLANs count
reached.
fatal The auto-provision could not create the VLAN due to the maximum
system VLAN count being reached. At this point the auto-
provision functionality is not operational. Delete one VLAN to
resolve the issue.
RMON_LLDP_MAX_SYS_VLANS
822 Created VLAN <vlan-id> info The specified VLAN has been successfully configured
automatically by LLDP.
RMON_LLDP_CREATED_VLAN
823 Deleted VLAN <vlan-id> info The specified VLAN configuration has been deleted automatically
by LLDP.
RMON_LLDP_DELETED_VLAN
824 Port(s) <port-num> added to
VLAN <vlan-id>
info The specified port(s) have automatically been added to the
specified VLAN configuration.
RMON_LLDP_ADDED_PORTS
825 Port(s) <port-num> removed
from VLAN <vlan-id>
info The specified port(s) have been removed from the VLAN
configuration.
RMON_LLDP_REMOVED_PORTS
# Message Severity Description