Event Log Message Reference Guide 2013/06

2
Event Log Messages
17 Bad mask <ip-addr><mask> warning Invalid mask.
RMON_IP_BAD_IP_MASK
18 IP address <ip-addr>/<mask>
configured on vlan_id <vlan-id>
info The specified IP address has been configured on the VLAN.
RMON_IP_ADDR_ADD
19 IP address <ip-addr> removed
from vlan id <vlan-id>
warning The specified IP address has been removed from the VLAN.
RMON_IP_ADDR_DEL
20 MAC address <mac-addr>
configured on vlan id <vlan-id>
info The specified MAC address has been configured on the VLAN.
RMON_IP_MAC_ADD
21 MAC address <mac-addr>
removed from vlan id <vlan-id>
info The specified MAC address has been removed from the VLAN.
RMON_IP_MAC_DEL
22-
35
— — Reserved
RMON_IP_RESERVED1 - 14
36 Too many COS rules configured -
limit of <max- rules> exceeded
warning An attempt to create more than the maximum number of QoS rules
allowed has occurred.
RMON_COS_TOO_MANY_ERROR
37 Some COS configuration items
will not be active
warning Some Class of Service (CoS) settings are not enabled.
RMON_COS_NOT_ACTIVE_ERROR
38 VLAN <vlan-id> QoS not
configured on all new ports.
Some QoS resources exceeded.
warning Some Class of Service (CoS) settings configured for the specified
VLAN are not enabled on all ports. The threshold for certain QoS
settings has been exceeded.
RMON_COS_VLAN_COS_WONT_FIT
39 Too many QoS features enabled,
mask resources exceeded
warning Some of the items configured for Class of Service (QoS) will not
be working. The maximum resources available have been
exceeded.
RMON_COS_MASKS_EXCEEDED
40 Initialization failed for TCP/UDP
priority
warning For CoS TCP/UDP priority, the initialization failed.
RMON_COS_APPTYPE_INIT_ERROR
41 Too many QoS ranges requested.
Some configurations did not
succeed.
warning There was an error during CoS initialization for protocol-based
prioritization.
RMON_COS_RANGES_EXCEEDED
42 — — Reserved
RMON_COS_RESERVED1 - 2
43 Unable to apply ACL <acl-name>
to vlan <vlan-id>, failed to add
entry <ace-num> to port <port-
num>
warning The ACL was not applied to the specified VLAN and the ACE entry
was not added to the port due to a lack of hardware resources on
the port.
RMON_ACL_WONT_FIT_VLAN_ERROR
44 Unable to add ACL entry to vlan
<vlan-id>, not enough hw
resources on port <port-num>
warning An ACE entry was not applied to an ACL, which has already been
applied to the specified VLAN, due to a lack of hardware
resources on the port.
RMON_ACE_WONT_FIT_ERROR
# Message Severity Description