Event Log Message Reference Guide 2013/06

65
Event Log Messages
2613 Inconsistent config for the
subsystem <subsystem>; at least
one loopback interface must
exist on the System before
configuring
standard A loopback interface must be configured on the system.
RMON_CONFIG_IPV6_ONLY_ERR
2614 Config attempt failed <err> info A configuration attempt failed.
RMON_CONFIG_ATTEMPT_FAILED
2615 SVLANS cannot be added to any
MST instance in qinq mixed vlan
mode. Inconsistent
configurations have been
deleted.
info You can’t add SVLANS to an MST instance in QinQ mixed VLAN
mode. The erroneous configurations are deleted.
RMON_CFG_MSTP_INSTANCE_WITH_DUALMODE_SVLAN_ERR
2616 The number of IPV6 ND DAD
attempts was reduced to the
maximum of 255.
info The maximum number of ND DAD attempts is 255.
RMON_CONFIG_DAD_ATTEMPTS_CHANGED
2618 Software downgrade performed
from <version> to <version>
info A software downgrade was performed.
RMON_CFG_COMPATIBILITY_ERROR
2619 A configuration file operation is
already in progress. Please try
again later.
info The configuration file is currently busy with an operation.
RMON_CONFIG_MUTEX_ERROR
2620 A corruption was found in the
configuration file. The corrupted
section was <section>
info There is a corrupted section in the configuration file.
RMON_CFG_INFORM_CORRUPTION
2621 MAC mirroring cannot be
enabled. MAc Mirroring
configurations have been
removed.
info MAC Mirroring cannot be enabled when Distributed Trunking is
enabled. MAC Mirroring configurations have been removed.
RMON_CFG_LOSS_DT_MAC_MIRROR_EXCLUSIVE
2631 Server not found at <address> Info The configured server is not available. The client could not find
the configured SNTP servers.
RMON_SNTP_NO_SERVER
2632 Client authentication is enabled Info Client authentication is enabled.
RMON_SNTP_AUTH_ENABLED
2666 <num-bits>-bits <rsa|dsa> client
public key <installed|removed>
<manager|operator> access.
(key-comment)
info Displays the size of the RSA or DSA client public key as well as if
it is being installed or removed and its access, manager or
operator.
RMON_SSH_CLIENTKEY
2671 Port <port-num> has been
downgraded to 10/100. See
www.procurve.com/
device_help/nic_up
warning The port has been changed to 10/100 mbps.
RMON_FF_AUTO_DOWNGRADE
# Message Severity Description