Event Log Message Reference Guide 2013/06

68
Event Log Messages
2750 Blade <module> LEDs configured
to be OFF
info The module’s LED’s are configured to be off in savepower mode,
in an operational chassis.
RMON_SAVEPOWER_LEDOFF_ENABLED
2751 Blade <module> LEDs configured
to be ON
info A module’s LED’s are configured to be on in normal mode, in an
operational chassis.
RMON_SAVEPOWER_LEDOFF_DISABLED
2752 Blade <module> PHY put to Auto
Low power mode
info A module’s PHY are configured to Auto Low power mode in an
operational chassis.
RMON_SAVEPOWER_PHY_LOWPOWER_ENABLED
2753 Blade’s <module> PHY put to
Auto Low power mode
info A module’s PHY are configured to normal power mode in an
operational chassis.
RMON_SAVEPOWER_PHY_LOWPOWER_DISABLED
2754 Request for “savepower module
<module>
info The indicated slot is being powered down in an operational
chassis.
RMON_SAVEPOWER_SLOT_ISSUED
2755 Slot <slot-num> is powered down info A slot is being powered down.
RMON_SAVEPOWER_SLOT_ENABLED
2756 Slot <slot-num> is powered up info A slot is powered up.
RMON_SAVEPOWER_SLOT_DISABLED
2757 Savepower LED time is ACTIVE info The time for the LED powersave feature is active.
RMON_SAVEPOWER_LEDOFF_TIMER_ACTIVE
2758 Savepower LED time is
SCHEDULED
info The timer for the LED powersave feature is scheduled.
RMON_SAVEPOWER_LEDOFF_TIMER_SCHEDULED
2759 Savepower LED timer is off info The timer for the LED powersave feature expires or is canceled.
RMON_SAVEPOWER_LEDOFF_TIMER_OFF
2762 Request for “reload module”
<slot-list>
info A slot is reloaded in an operational chassis.
RMON_RELOAD_SLOT_ISSUED
2763 Configuration removed for
module in slot <slot>.
info A slot has been removed with the no module command and the
entire configuration for the module has been deleted.
RMON_CHASSIS_MODULE_CONFIG_REMOVED
2765 Unsupported mixed power
supply types (PoE & PoE+)
detected in chassis
warning Mixed power supplies (PoE and PoE+) are present in the chassis.
This is not supported.
RMON_POE_MIXED_POWER_SUPPLY_CFG
2766 Supported same power supply
types (PoE or PoE+) restored in
chassis
info The same type (PoE or PoE+) of power supplies are present in the
chassis. Mixed types are not supported.
RMON_POE_SAME_TYPE_POWER_SUPPLY_CFG
2767 Port <port-num> detected non-
HPID xcvr or DAC
warn The indicated port has detected a non-HP transceiver.
RMON_PPMGR_NON_HPID_XCVR
# Message Severity Description