Event Log Message Reference Guide 2013/06

74
Event Log Messages
2840 Invalid Grace LSA on interface
<interface>: Invalid Restart
Reason TLV length
none The grace LSA is invalid because the TLV length is incorrect.
RMON_OSPF3_RESTART_REASON_TLV_LENGTH
2841 Invalid Grace LSA on
interface<interface>: Restart
Reason TLV missing
none The grace LSA is invalid because the TLV is missing.
RMON_OSPF3_RESTART_REASON_TLV_MISSING
2842 Invalid Grace LSA on
interface<interface>: Unknown
restart reason <reason>
none The grace LSA is invalid for an unknown restart reason.
RMON_OSPF3_RESTART_UNKNOWN_REASON
2843 Failed to find local interface for
nexthop <next hop>
none The local interface for the next hop can’t be found.
RMON_OSPF3_SPF_NO_NEXTHOP_INTERFACE
2844 Restart will not happen. Grace
Period already expired
none The grace period expired, so the restart will not occur.
RMON_OSPF3_RESTART_GRACE_PERIOD_EXPIRED
2845 Configured Hello Interval <num-
secs> seconds on virtual
interface <int> is greater than
config.
info The configured hello interval indicated is invalid.
RMON_OSPF3_INVALID_HELLO_INTERVAL
2846 Configured Dead Interval <num-
secs> seconds on virtual
interface <int> is less than config
info The configured Dead Interval indicated is invalid.
RMON_OSPF3_INVALID_DEAD_INTERVAL
2847 Entering graceful helper mode
for neighbor <neighbor>
info Entering graceful helper mode for the indicated neighbor.
RMON_OSPF3_RESTART_ENTER_HELPER_MOFE
2848 Exiting helper mode for neighbor
<neighbor>
info Exiting helper mode for the indicated neighbor.
RMON_OSPF3_RESTART_EXIT_HELPER_MODE
3001 System reboot due to Power
Failure
fatal Appears when switch reboots due to a power failure.
RMON_POWER_FAILURE_REBOOT
3002 System reboot due to Switch
Reset
fatal The switch performs a soft reboot when “boot system flash
<primary | secondary>” is executed.
RMON_RESET_ SWITCH_REBOOT
3003 Configuration hash calculation
started.
info The hash generation for the running configuration has started.
RMON_SYSTEM_HASH_CALC_START
3004 Configuration hash calculation
finished
info The hash generation for the running configuration is finished.
RMON_SYSTEM_HASH_CALC_FINISH
3005 Max hop count <count> reached
for a <type> type stack packet.
warn The maximum hop count for a packet type has been reached.
RMON_PRO_STACK_MAX_HOP_COUNT
3006 Unknown stacking packet type
<type>
warn An unknown packet type has been received.
RMON_PRO_STACK_UNKNOWN_PKT_TYPE
3007 Stack port cable looped back on
ports <port-num> to <port-num>
info The stack cable is looped back to the same switch.
RMON_PRO_STACK_LOOPBACKED
# Message Severity Description