HP 560 Wireless 802.11n Access Point Installation Guide

Status LEDs
Table 1 AP status LED states
DescriptionRadio
1
LEDEthernet LEDPower/System
OK LED
The AP has power.——Amber
The AP is starting up.
——
Flashing green
every two
seconds.
The AP is either:
——
Flashing green
once per second.
• Looking for an IP address
• Building the list of VLANs on which to perform discovery
The management tool is available until discovery occurs.
The AP has obtained an IP address and is attempting to
discover a controller.
Flashing in sequence from left to right
The AP has found a controller and is attempting to establish a
secure management tunnel with it.
Flashing alternatelyGreen
The AP has received a discovery reply from two or more
controllers with the same priority setting.
OffFlashing alternately
It cannot connect with either controller until the conflict is
resolved.
The AP is attempting to establish a local mesh link to a master
node.
Flashing—Flashing
The AP is attempting to establish wired connectivity.—Flashing
1
1 or 2
6 Overview