- Hewlett-Packard Fax Machine User Guide

58 Care and maintenance
LCD error messages
No Dial Number There is no number in the redial memory.
Not available while
reprinting fax
The machine could not receive a new fax while printing the
stored faxes.
Not Found The number you are searching for does not exist in memory.
Number already
registered
The number you are trying to enter already exists in the
phone book or junk fax list.
Number Not Assigned There is no number assigned to this One-Touch or two-digit
Speed number.
Poll Code Error The remote user entered the wrong poll code.
Poll job exists
already
You have already programmed a polling send. Cancel
scheduled job and try again.
Polling Error
Check remote site
The machine you want to poll is not ready to answer your
poll. Check with the other person.
Receiving Error.
Ask sender to
try again.
There is an error while receiving a fax.
Remove jammed
document
The document you are sending has jammed in the document
feeder. To clear the document jam, see Document jams
during transmission on page 50.
You tried to copy or fax a document which is longer than
390 mm (15.4 in.).
Remove jammed paper
and press Cancel
The paper has jammed during printing. To clear the paper
jam, see Paper jams during printing on page 51.
Send Error.
Try again.
There is an error while sending a fax.
System Busy
Try again later
The fax machine is busy doing something else.
To redial now,
press Start
The machine is waiting (three minutes) to automatically
redial the fax number that was busy or did not answer.
You have the option to manually redial by pressing Start.
Processing Job You attempted to enter Favorites while sending or printing
Favorites document.
Display Status/Solution