SuperStack II Advanced RPS Management Module User Guide

DUA1608-0AAA01
Command Line Interface 3-9
Flow Control
Community String
Usage:
FLOwctrl ON or OFF
Abbreviation:
FLO
Description:
Change the Console data flow
signal to ON or OFF. The default is
OFF. When enabled, the modem
control signals are enabled (see
Appendix A) along with XON and
XOFF.
If the DSR signal goes low when in
the enabled state, the
Management Module automatically
logs you out.
Value takes effect from:
Reset Command
Value retained during Power
cycle:
Yes
Usage:
communitystring <string>
Abbreviation:
COM
Description:
Sets the community string for the
current user to the specified string.
The string you enter, which can be
up to 64 characters, is displayed and
you are asked to confirm the entry.
There are two default settings for the
community string: public and
private. Only the private string is
user-definable.
The public community string only
gives read access to the MIB,
whereas a user configured
community string gives read and
write access to the MIB.
Value takes effect from:
Immediately
Value retained during Power
cycle:
Yes