HP 6G Virtual SAS Manager User Guide

Supported parametersTarget syntaxDevice
<all|##:##>storageenclosure
portbox
External storage enclosure connected to a
SAS switch blade
<all|#>storageenclosure
enclosureid
<all|##:##>storageenclosurebay
portboxbay
Storage enclosure drive bay (must be
preceeded by a blade enclosure or switch
target)
<all|#>zonegroup nameZone group (must be preceeded by a blade
enclosure or switch target)
Example target entries in a command string:
=> bladeenclosure chassisname=ABC
=> bladeport id=6
=> switch location=local
=> storageenclosure portbox=51:1
Command listing
The command variable instructs the system to perform a task. The following commands are
supported:
Command descriptionCommand syntax
Add an entry to an existing configuration element.add
Enable or disable advanced settings, such as the multi-initiator mode and
port-splitting.
advance
Back up the switch configuration for safekeeping.capture
Clear the current zoning configuration.clear
Clear all SNMP parameters and disable SNMP services.clearsnmp
Discard configuration changes made by commands entered since the last
startupdate command.
clearupdate
Clear all entries in the VSM event log.clearvsmeventlog
Create new configuration elements.create
Remove configuration elements.delete
Create a zip file with detailed diagnostic logs for the switch.diagnosticlog
Run diagnostic tests on the system.diags
Update switch or storage enclosure firmware.flash
Force the switch to active (from passive)forceactive
Display all supported VSM CLI commands or a detailed description of a specified
command.
help
Restore a previously backed up configuration on the switch.input
Merge a previously-split switch port from sub-ports back into a single port.merge
Update configuration elements.modify
Enter network settings.network
56 Getting started