F3215-HP Load Balancing Module High Availability Command Reference-6PW101

95
Parameters
packet-timeout: Specifies the timeout time in milliseconds for waiting for a response in the UDP jitter or
voice operation. The value is in the range of 10 to 3600000.
Examples
# Configure the timeout time for waiting for a response in the UDP jitter operation as 100 milliseconds.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type udp-jitter
[Sysname-nqa-admin-test-udp-jitter] probe packet-timeout 100
probe timeout
Use probe timeout to specify the probe timeout time. If a probe does not complete within the period, the
probe is timed out.
Use undo probe timeout to restore the default.
Syntax
probe timeout timeout
undo probe timeout
Default
The timeout time of a probe is 3000 milliseconds.
Views
DHCP operation view, DNS operation view, DLSw operation view, FTP operation view, HTTP operation
view, ICMP echo operation view, SNMP operation view, TCP operation view, UDP echo operation view
Default command level
2: System level
Parameters
timeout: Specifies the probe timeout time in milliseconds. The value is in the range of 10 to 86400000
for the FTP or HTTP operation, and 10 to 3600000 for the DHCP, DNS, DLSw, ICMP echo, SNMP, TCP,
or UDP echo operation.
Usage guidelines
This command is not available for the UDP jitter or voice operation.
Examples
# Configure the probe timeout time for the DHCP operation as 10000 milliseconds.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type dhcp
[Sysname-nqa-admin-test-dhcp] probe timeout 10000
reaction checked-element icpif
Use reaction checked-element icpif to configure a reaction entry for monitoring the ICPIF value in the
voice operation. You cannot edit a reaction entry. To change the attributes in a reaction entry, use undo
reaction to delete the entry first.