F3215-HP Load Balancing Module High Availability Command Reference-6PW101

117
<Sysname> display nqa server status
nqa server is: enabled
tcp-connect:
IP Address Port Status
2.2.2.2 2000 active
udp-echo:
IP Address Port Status
3.3.3.3 3000 inactive
Table 29 Command output
Field Descri
p
tion
tcp-connect TCP connect listening service.
udp-echo UDP echo listening service.
IP Address IP address specified for the TCP/UDP listening service on the NQA server.
Port Port number of the TCP/UDP listening service on the NQA server.
Status
Listening service status:
• active—Listening service is ready.
• inactive—Listening service is not ready.
nqa server enable
Use nqa server enable to enable the NQA server.
Use undo nqa server enable to disable the NQA server.
Syntax
nqa server enable
undo nqa server enable
Default
The NQA server is disabled.
Views
System view
Default command level
2: System level
Examples
# Enable the NQA server.
<Sysname> system-view
[Sysname] nqa server enable
Related commands
• nqa server tcp-connect
• nqa server udp-echo
• display nqa server status