F3215-HP Load Balancing Module High Availability Command Reference-6PW101

120
Interface backup configuration commands
display standby flow
Use display standby flow to display statistics about traffic on the active interfaces participating in load
balancing.
Syntax
display standby flow [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see System Management Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case-sensitive string of 1 to 256 characters.
Examples
# Display statistics about the traffic on the active interface participating in load balancing.
<Sysname> display standby flow
Interfacename : GigabitEthernet0/1
Flow-interval(s) : 100
LastInOctets : 868168
LastOutOctets : 1818667
InFlow(Octets) : 50070
OutFlow(Octets) : 100088
BandWidth(b/s) : 9000
UsedBandWidth(b/s) : 8000
Table 30 Command output
Field Descri
p
tion
Interfacename Name of the active interface.
Flow-interval(s) Intervals for checking traffic on the active interface.
LastInOctets Sum of the octets received on the active interface until the last check.
LastOutOctets Sum of the octets sent on the active interface until the last check.
InFlow(Octets) Sum of the octets received on the active interface during the last interval.