F3215-HP Load Balancing Module High Availability Command Reference-6PW101

27
Field Descri
p
tion
Pri Reduced
Priority value that is reduced when the monitored interface is down or
removed, or when the status of the monitored track entry turns to negative. It is
displayed only when the vrrp ipv6 vrid track interface or vrrp ipv6 vrid track
command is executed.
Switchover
Switchover mode. If the status of the monitored track entry turns to negative,
the backup immediately switches to the master.
# When VRRP operates in load balancing mode, display brief information about all VRRP groups on the
device.
<Sysname> display vrrp ipv6
IPv6 Standby Information:
Run Mode : Load Balance
Run Method : Virtual MAC
Total number of virtual routers : 2
Interface VRID State Run Address Active
Pri
----------------------------------------------------------------------
GE0/1 1 Master 140 FE80::1 Local
----- VF 1 Active 255 000f-e2ff-4011 Local
Table 9 Command output (load balancing mode)
Field Descri
p
tion
Run Mode
Current VRRP working mode:
• Standard—Standard mode.
• Load Balance—Load balancing mode.
Run Method
Current VRRP running mode:
• Real MAC—Real MAC mode, which means the virtual IP address of the VRRP
group is mapped to the real MAC address of the interface.
• Virtual MAC—Virtual MAC mode, which means the virtual IP address of the VRRP
group is mapped to the virtual MAC address.
Total number of virtual
routers
Number of VRRP groups.
Interface Interface to which the VRRP group belongs.
VRID ID of the VRRP group number or ID of the VF VF number.
State
• If VRID is number, this field indicates the status of the device in the VRRP group,
including Master, Backup, and Initialize.
• If VRID is VF number, this field indicates the status of the VF in the VRRP group,
including Active, Listening, and Initialize.
Run Pri
• If VRID is number, this field indicates the running priority of the device, that is, the
current priority of the device. With VRRP tracking configured, when the state of
the monitored interface or track entry changes, the priority of the device changes.
• If VRID is VF number, this field indicates the running priority of the VF. With VF
tracking configured, when the state of the monitored track entry changes, the
priority of the VF changes.
Address
• If VRID is number, this field indicates the virtual IP address of the VRRP group.
• If VRID is VF number, this field indicates the virtual MAC address of the VF.