F3215-HP Load Balancing Module High Availability Command Reference-6PW101

49
IPC configuration commands
The display commands in this document display only information about active nodes.
"Local node" refers to the current LB module.
display ipc channel
Use display ipc channel to display channel information for a node.
Syntax
display ipc channel { node node-id | self-node } [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
node node-id: Displays channel information for a node. The node-id argument takes a node number in
the range of 0 to 1.
self-node: Displays channel information for the local node.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see System Management Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display channel information for node 0.
<Sysname> display ipc channel node 0
ChannelID Description
-----------------------------------------------
19 RPC channel
94 IPC test channel
149 Prehistorical channel, NO.1
Table 14 Command output
Field Descri
p
tion
ChannelID
Channel number, which has been predefined and assigned by the
system. One channel number corresponds to one module. The display ipc
channel command displays the numbers of the current active modules.