F3215-HP Load Balancing Module High Availability Command Reference-6PW101

53
self-node: Displays packet statistics for the local node.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see System Management Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display the packet statistics for the local node.
<Sysname> display ipc packet self-node
ChannelID Sent-fragments Sent-packets Received-fragments Received-packets
--------------------------------------------------------------------------
11 828 810 819 810
13 0 0 0 0
14 5 3 5 5
15 0 0 0 0
16 0 0 0 0
17 50 50 37 35
19 0 0 0 0
Table 18 Command output
Field Descri
p
tion
ChannelID Channel number.
Sent-fragments Number of fragments sent.
Sent-packets
Number of packets sent.
Whether a packet is fragmented depends on the
interface MTU and the packet size in bytes. If the
packet size is larger than the MTU, the packet is
fragmented. If the packet size is smaller than or equal
to the MTU, the packet is sent.
Received-fragments Number of fragments successfully received.
Received-packets
Number of packets successfully received.
If fragments are received on an interface, the system
reassembles the fragments and sends a complete
packet to the upper layer software.
display ipc performance
Use display ipc performance to display IPC performance statistics.
Syntax
display ipc performance { node node-id | self-node } [ channel channel-id ] [ | { begin | exclude |
include } regular-expression ]