F3215-HP Load Balancing Module High Availability Command Reference-6PW101

57
Parameters
node node-id: Enables IPC performance statistics for the specified node, where node-id represents the
number of the specified node. The node-id argument takes a node number in the range of 0 to 1.
self-node: Enables IPC performance statistics for the local node.
channel channel-id: Enables IPC performance statistics for the specified channel, where channel-id
represents the channel number. The channel-id argument takes a channel number in the range of 0 to
255.
Usage guidelines
When IPC performance statistics is disabled, the statistics data does not change. The display ipc
performance command displays the statistics collected before IPC performance statistics was disabled.
Examples
# Enable IPC performance statistics for channel 18 on node 1.
<Sysname> ipc performance enable node 1 channel 18
reset ipc performance
Use reset ipc performance to clear IPC performance statistics.
Syntax
reset ipc performance [ node node-id | self-node ] [ channel channel-id ]
Views
User view
Default command level
1: Monitor level
Parameters
node node-id: Clears the IPC performance statistics for the specified node, where node-id represents the
number of the specified node. The node-id argument takes a node number in the range of 0 to 1.
self-node: Clears the IPC performance statistics for the local node.
channel channel-id: Clears the IPC performance statistics for the specified channel, where channel-id
represents the channel number. The channel-id argument takes a channel number in the range of 0 to
255.
Usage guidelines
After this command is executed, the corresponding statistics will be cleared.
Examples
# Clear the IPC performance statistics for channel 18 on node 1.
<Sysname> reset ipc performance node 1 channel 18